Planning Zones & Controls in Wivenhoe, Tasmania

Wivenhoe is located within Burnie City Council (Tasmania). The following planning zones and overlays are commonly found in this area.

↗

Free property search

Search any property in Wivenhoe on the map

Type an address — get the zone, overlays, hazards and a downloadable Snapshot PDF in seconds. No signup required.

Planning Zones

These zones are commonly applied to properties in Wivenhoe and the broader Burnie City Council area.

General Residential
Inner Residential
Low Density Residential
Rural Living
Village

Overlays & controls

Properties in Wivenhoe may be affected by one or more of the following overlays / codes, which add extra planning controls on top of the zone.

Bushfire-Prone Areas
Flood-Prone Areas
Coastal Inundation
Local Historic Heritage
Landslip

What can you build in Wivenhoe?

Wivenhoe sits in Burnie City Council (Tasmania). What you can build — a granny flat, a subdivision, a second dwelling, townhouses or an extension — depends on your property's zone and overlays. These guides set out the Tasmania rules for the most common projects:

Heads up: parts of Wivenhoe carry heritage, bushfire and flood controls (see the overlays above), which can change what's allowed or require planning approval.

→Build a granny flat in WivenhoeSecondary-dwelling size, siting and whether you need approval.→Subdivide your land in WivenhoeMinimum lot sizes and the approval pathway.→Build a second dwelling in WivenhoeDual-occupancy site area and design rules.→Build townhouses or units in WivenhoeMulti-dwelling development and how many fit.→Extend your house in WivenhoeWhen a renovation needs planning approval.

Check your property in Wivenhoe

Find out exactly what planning controls apply to your property in Wivenhoe and whether you need approval.

Free Property Snapshot

Zone, overlays & hazards in seconds

Free

Tasmania Planning Report

Plain-English read on what you can build

$39

Frequently Asked Questions

What can I build in Wivenhoe?

What you can build in Wivenhoe — such as a granny flat (secondary dwelling), a subdivision, a second dwelling, townhouses or a house extension — depends on your property's planning zone and any overlays, together with the Tasmania planning rules. See the project guides above for Wivenhoe, or get a $39 planning report for a plain-English answer specific to your address.

What planning zone is Wivenhoe in?

Properties in Wivenhoe are commonly located in the General Residential, Inner Residential, Low Density Residential, Rural Living. The exact zone for your property depends on its specific location within Wivenhoe. You can check your property's zone using the LIST (LISTmap) or our free Property Snapshot tool.

Do I need a planning permit in Wivenhoe?

Whether you need a planning approval in Wivenhoe depends on the zone your property is in, any overlays that apply, and the type of work you are proposing. Most new dwellings, extensions, subdivisions, and changes of use require approval. Some minor works may be exempt or "accepted development" depending on the zone and overlay controls. Use our free tools to check your specific situation.

How do I find my property's planning zone?

You can find your property's planning zone by searching your address on the LIST (LISTmap), the official Tasmania planning map. It shows the zone, overlays, and other planning controls that apply to any property in Tasmania.